I & G Distributors USA
|
|
|
|
Let RAU work for YOU!
"We Make it EASY!"
RAU EJ2000 Ejaculator Probe
"Simple, gentle, effective"
Why use the RAU Ejaculator Probe?
The RAU Ejaculator probe has been developed after extensive research and is constructed from high quality materials. The ejaculator probe is used for the electronic ejaculation of bulls for semen sample collection. The unit uses a low current and this ejaculation process has been shown to cause no residual stress to the animal.The ejaculator probe is an accessory to the IM2000 Animal Immobilizer. It simply plugs into the IM2000 animal immobilizer pulse generator and is used with the HIGH switch setting. There is absolutely no radiation from this device. The design and the effect of this probe is such that the semen obtained is of extremely high quality. The system is gentle and field tests show that the bull is not injured in any way and will happily return to the chute. Operating Procedure: 1. The bull must be in a chute with access. 2. The bull must be sexually stimulated. This is done by inserting a hand into the rectum and emptying the dung from the dung passage and at the same time massaging the rectal passage. Massaging the prostate, testicles, and penis sheath is also recommended. 3. The unit must be switched off, and the control knob must be set to zero. Fully insert the ejaculator plug into the socket. 4. With the unit switched off, lift the tail and insert the entire probe into the rectum of the animal allowing the metal handle to protrude. Ensure that the two brass contacts are facing down. A lubricant is recommended to facilitate insertion and electrical contact. Allowing the tail to return to its normal state will keep the probe in position. 5. With the control knob set to zero, switch the unit on. With the power switch in the “HIGH” position gradually adjust the intensity to maximum and repeat this process three or four times or until the bull ejaculates.
|
[Terms
of Use ] [ Privacy
Policy ]
|
